Push-Pull 正负压微流控压力泵

    • 产品概况
      • The LineUp Push-Pull is a stand alone controller with the ability to deliver finely regulated pressure or a vacuum through a single outlet over the range of -800 to +1000 mbar. Suited for any application within this range, it brings the existing benefits of the LineUpTM series with expanded capabilities as well as superior stability and high performance.

        Main Benefits
        • Easy to use: Start experiment in minutes. No PC is needed for simple experiments.
        • Modular: Combine as many module as the experiment requires. Each module is a separate pressure channel and can be controlled independently.
        • Pressure and Vacuum control in one single unit: By connecting the push pull unit connected to a pressurized air source or vacuum source the same small module can be used to aspirate or inject fluids in a controlled manner.
        • Compact: Instead of looking at the PC, users can keep their eyes on the microscope, adjusting the control dial with one hand. In this stand-alone configuration, the device allows for pressure or flow rate control and volume dispense making it ideal for benchtop use.
    • 产品特性
      • 类别
        Microfluidic flow control systems


    • 产品应用
      • 应用说明
        • For experiments where combined or alternating pressure and vacuum based fluid movement, aspiration and dispensing can be accurately controlled
        Flow Recirculation
        • The combination of vacuum and pressure can be used to redirect the flow bidirectionally
        Deliver small volumes with no waste
        • When samples from 5µL to 500 µL need to be injected to a chip, the tubing may be used as a reservoir. The main reservoir may be filled with another liquid, or air may be used to drive the liquid introduction